Tuesday, May 28, 2013
Cleveland XL Custom Driver
The hot new adjustable driver from Cleveland Golf
|This Article Features Photo Zoom|
I started by making adjustments slowly, first, by opening the face angle by 0.75 degrees and again by 1.5 degrees. In both instances, I saw significantly lower ballflights with some fade bias. I then went back to the "Square" setting to readjust, then ratcheted the face angle toward the "L."
I not only saw higher launches, but also some serious draw bias. For you naysayers who think that adjustability is marketing hype, we're here to tell you it isn't, especially with the XL Custom. I was pleased to find that each setting had a unique look at address and each produced varying ballflights.
My only criticism, and it's a moot point, by the way, is the torque wrench itself. It's a square shape, which took a little wiggling to get it into the screw. It's awkward at first, but after a couple tries, I had it figured out. Also, the screw sticks to the wrench, thanks to a small ball bearing on the tool's tip. I actually panicked the first time I removed the screw, thinking I had dropped it in the grass. But there it was, still on the torque wrench. Whew.
Hitting several hundred balls in a controlled environment is one thing, actually using the driver on the course is completely different. I set the driver for 0.75 degrees open and proceeded to the first tee, knowing that according to the rules I had to stick with that setting the whole round. Before I tell you how that went, it's my opinion that when you have an adjustable club, it's imperative to let the club do the shot-shaping work for you. With my old driver that has a square face angle, any attempt to hit a fade or draw was a conscious act that I did with my swing. But with an adjustable driver, if it's set up to hit a draw or a fade, the key is to swing normally and let it happen and not force anything. I happened to do just that off the first tee, and to my delight, hit a towering fade that split the fairway. Ahhh. And, while much is said about how this driver is both long and the adjustability really works, it's worth mentioning that this driver is also incredibly forgiving on mis-hits.
There's one caveat to adjustable drivers that I think better players (not that I consider myself one, but there was a time when I was) will notice, however. When you tinker with a driver to accommodate a certain ballflight, it becomes more difficult to make adjustments to your trajectory when you need to. For instance, if I set my driver to hit fades, on the rare occasion where I do need to hit a draw, it becomes more difficult for me. Now, that may not be true for everyone, but for me, both physically and mentally, I have a hard time defying my driver setup and hitting a shot that the hosel configuration isn't designed for. Remember, that's just one man's opinion. With an open-face angle, I can barely hit a draw. Maybe it's just me.
The Classic XL Custom is a fantastic new driver. The adjustability feature produces all sorts of different trajectories, and the look, feel and sound all cater to my taste. The minor criticisms I have (the faint dot on the crown and unusual torque wrench) pale in comparison to how this driver performs. The JDL shaft I tried performed nicely, too; however, for my swingspeed, I might have opted for a slightly stiffer and heavier model than the one I tried. I made a few swings that I feel overpowered the shaft a bit. Adjustability aside, I was amazed at how well my good drives performed, usually with a mid-height trajectory (which is lower than my experience with last year's driver) with moderate to low spin rates. Even more impressive were my mis-hits, which managed to fly relatively straight with some impressive distance. And, by the way, because it's a deep face design, I found my best drives to come from teeing the ball a little higher than I would with other drivers that have shallower face areas.
Look for this driver to be a hit in 2013. It was with me.
Shaft/Grip: Miyazaki JDL Graphite Shaft (6X Flex), 45 inches, midsized Tour Wrap 2Gen grip
Favorite Setting: 0.75 degrees open
Options: Also available in a huge variety of shafts, including Mitsubishi Rayon Fubuki Tour and Matrix Ozik Black Tie graphite shafts
Price: $349 MSRP
More Information: clevelandgolf.com
Page 2 of 2